Eurotek ET 100 is a thin dry waxy film-type corrosion inhibitor for providing short-term protection from rust and corrosion for up to 9 months indoors under normal storage conditions. It forms a light protective film over the surface and seals out the entry of moisture & corrosion. Its dry nonstaining formulation resists dirt & dust build up and is safe…
Eurotek ET 200 is a firm waxy film-type corrosion inhibitor for providing long-term indoor and outdoor surface protection for all metals and components for up to 2 years. It is highly resistant to humidity and salt spray and forms a protective shield against rust, moisture, heat, and corrosive influences. • Firm waxy film completely seals out moisture. • Heavy duty…
Eurotek ET 50 forms a clear thin non-drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Provides long-term indoor protection to surfaces for up to 6 months. Very effective corrosion inhibitor and assures complete surface protection from water, oxygen, and rust. Safe,…
Eurotek ET 90 is a soft waxy film-type corrosion inhibitor for providing long-term indoor and outdoor surface protection to all metals and components for up to 2 years. It is highly resistant to humidity and salt spray and forms a protective shield against rust, moisture, and corrosive influences. Its heavy-duty formulation provides both lubrication as well as corrosion protection to…
High-quality, non-lifting primer coatings for use on surfaces where good adhesion is needed before the top/finish coat. Fast-drying; dries to touch in 10 minutes. • Red color. • Good Adhesion, Fast Drying. Packing Available 500 ml, 700 ml 4 ltr 20 ltr, 200 ltr Case Pack 24 Can 4 can 1 barrel
Eurotek Stainless steel spray is a high-performance coating designed to provide protection to stainless steel. It air dries fast on application to leave a coating with stainless steel 316L pigments. It is a single-component ready-to-use protective film. SS 185 does not contain any chlorinated solvents, CFCs, or ozone-depleting c chemicals. 1SS 185 is a specially designed coating containing stainless steel…
A restorative coating fortified with zinc for preventing rust and corrosion on ferrous metal surfaces with one coat application. 97% pure zinc metallic flake with 65% zinc in dry film. Stops rust and corrosion on any iron or steel surface for protection equalto or better than hot-dipped galvanizing. Restores galvanized surfaces to the bright look of hot-dipped galvanizing. Meets performance…
The leader in the industry in corrosion prevention. Can be easily sprayed, brushed, or dipped onto any metal surface. Its zinc-rich formula is designed for permanent protection. • 97% pure metallic zinc dust with 93% zinc in dry film. • Withstands 250 hours of 5% salt spray testing (ASTM B-117). • Light gray, matte finish. • Zinc sacrifices itself to…
